








Here's a good example of what proper prep work actually looks like on an exterior painting job. Before we ever cracked open a can of paint, we power washed the entire exterior, scraped the wood siding, and sealed the edges with primer. That process takes time - but it's the difference between a paint job that lasts and one that starts peeling in a season or two.
This home had wood siding that needed real attention before any color went on. Loose paint, rough edges, and a block foundation that was ready for a fresh coat. We worked through all of it methodically. Primer on the edges first, then two full coats on the block foundation. The gutters and doors got the same treatment.
The color choice is a clean sage green on the siding with a darker charcoal-toned foundation below. That two-tone approach does a lot of work visually - it grounds the house and gives it a finished, intentional look rather than just a quick paint-over.
A lot of homeowners don't realize how much the foundation coat matters. The block soaks up paint differently than siding does, which is exactly why two coats there is the right call. One coat on block tends to look uneven and fades faster. Two coats means the color stays consistent and the surface is properly protected.
What you end up with is a home that looks well cared for from every angle - front, sides, and back. No shortcuts, no skipped steps. Just solid prep and quality exterior painting done the right way.